HP M551DN manual IPv6 Settings Address Manual Settings Enable

Models: M551DN

1 276
Download 276 pages 45.08 Kb
Page 87
Image 87

Manually configure IPv6 TCP/IP parameters from the control panel

Use the control-panel Administration menus to manually set an IPv6 address.

1.At the control panel, press the Home button.

2.To enable manual configuration, open each of the following menus:

Administration

Network Settings

Jetdirect Menu

TCP/IP

IPv6 Settings

Address

Manual Settings

Enable

Select the On option, and then press the OK button.

3.To configure the address, open each of the following menus:

Administration

Network Settings

Jetdirect Menu

TCP/IP

IPv6 Settings

Address

Use the numeric keypad, or press the up arrow or the down arrow to enter the address. Press the OK button.

NOTE: If you are using the arrow buttons, you must press the OK button after entering each digit.

ENWW

Connect to a network with Windows 69

Page 87
Image 87
HP M551DN manual IPv6 Settings Address Manual Settings Enable