HP M551DN manual Paper does not feed automatically Cause Solution

Paper does not feed automatically

Paper does not feed automatically

Cause	Solution
Manual feed is selected in the software program.	Load Tray 1 with paper, or, if the paper is loaded, press the
	OK button.
The correct size paper is not loaded.	Load the correct size paper.
The input tray is empty.	Load paper into the input tray.
Paper from a previous jam has not been completely removed.	Open the product and remove any paper in the paper path.
The paper size is not configured correctly for the input tray.	Print a configuration page or use the control panel to
	determine the paper size for which the tray is configured.
The guides in the tray are not against the paper.	Verify that the paper guides are touching the paper.
The manual-feed prompt is set to Always. The product	Load Tray 1 with paper, or, if the paper is loaded, press the
always prompts for manual feed, even if the tray is loaded.	OK button.
	Or, change the manual-feed prompt setting to Unless
	loaded, so that the product prompts for manual feed only
	when the tray is empty.

The Use Requested Tray setting on the Manage Trays menu is set to Exclusively, and the requested tray is empty. The product will not use another tray.

Load the requested tray.

Or, change the setting from Exclusively to First on the Manage Trays menu. The product can use other trays if no media is loaded in the specified tray.

ENWW Paper does not feed automatically 203