1.Power on the system by pushing the power button on the front panel. If using iLO 2, click Momentary Press on the Power Management page to power on the server, then click Launch on the Status Summary page to open the iLO 2 Integrated Remote Console and complete the installation process.
The storage system starts and displays an HP Network Storage System installation screen. The storage system installation process takes approximately
NOTE:
Your storage system comes
When the storage system installation process nears completion, the Windows Storage Server 2008 R2 desktop displays the following message: The user's password must be changed before logging on the first time. Log on to the storage system by establishing an Administrator password:
2.Click OK.3.Type an Administrator password in the New password box.4.After the Administrator password has been set, the storage system completes the installation process and restarts.
7.When prompted, press CTRL+ALT+DELETE to log on to the system. If using iLO 2, on the iLO 2 Integrated Remote Console tab, click the button labeled CAD and then click the
IMPORTANT:
After establishing the new Administrator password, be sure to remember it and record it in a safe place if needed. HP has no way of accessing the system if the new password is lost.
After logging in for the first time, the Welcome screen of the HP StorageWorks Rapid Startup Wizard opens. Use the HP StorageWorks Rapid Startup Wizard to set up your system with basic configuration information.
Confirm Windows activation
Immediately after installing the storage system, confirm that your copy of the Microsoft® Windows® Storage Server™ 2008 R2 operating system has been activated.
IMPORTANT:
Some storage systems may not automatically activate Windows during the system installation process.
To check the activation status of Windows, open Control Panel (Start > Control Panel) and then
18 Installing and configuring the server