HP Palmtop 660LX, Palmtop 620X manual Receiving faxes

the toolbar. bFAX Pro™ uses the dialing settings configured in the Control Panel of your Handheld PC. Please refer to the Dialing Patterns and Dailing Locations information in “Connecting to an ISP” for details on how to set Dailing Patterns and how to create Dailing Locations or see ‘What is a “Dialing Location” and what would I use it for?’ in the Frequently Asked Questions section of this chapter.

To select a new Dialing Location for bFax:

1.Choose Communications from the Options menu and select the Dialing tab.

2.Select ‘Use dialing location’, tap the button and select the appropriate Dialing Location from the drop-down list in Dialing Properties.

!Note

If you do not wish to use Dialing Locations, uncheck ‘Use dialing location’. In this case, every number will be dialed exactly as it was entered.

Make sure you have entered the correct Dialing Patterns. You can set these by tapping the Dialing Patterns button in the Communications Properties (go to Con- trol Panel, select Communications, select the Dialing tab).

Receiving faxes

To receive a fax choose Receive Fax from the fax menu. Enter a name for the incoming fax or use the default name that already exists. By choosing “Yes”, the file will be replaced.

You can also manually receive a fax. First attempt to receive a fax as specified above. When the bFAX™ status dialog indicates that bFAX™ is waiting for an incoming call, the “Answer Now” button will be enabled. If you tap on the “An- swer Now” button, bFAX™ will cause the modem to go “off hook” and attempt to manually answer an incoming fax.

104-HPPalmtopPCUserGuide