HP Palmtop 620X, Palmtop 660LX To set up manual dialing

This indicates that the international access code should be dialed and then after a pause the country code, area code and local number. i.e. “001,EFG” or “9,001,EFG”. When you have finished tap OK to leave the dialing patterns and communications windows.

Example of dialing patterns are listed below:

Country	Local	Long Distance	International
Singapore	G	G	001, EFG
Malaysia	G	0FG	001, EFG
US	G	1FG	011, EFG
France1	0G	0G	00, EFG
France2	0FG	0FG	00, EFG
UK	0FG	0FG	00, EFG

US: If you need to dial a phone number that is in your area code but still requires a “1” and the area code (long distance) to dial it, you need check the “Force Long Distance” box when you “Make a New Connection.” To change a Dial-Up Con- nection that is already made:

-Tap Start and Programs

-Double-tap Communications and Remote Networking

-Tap to highlight the connection to be changed.

-Tap File, then Properties.

-Tap Force Long Distance box.

France1: Use this dialing pattern if you have put in the entire telephone number minus the leading 0 in the telephone number field and left the area code field blank.

France2: Use this dialing pattern if you have put the one-digit area code (without the leading 0) in the area code field and the 8-digit number in the phone number field.

To set up manual dialing:

If you need to use a dialing string which has more than 32 characters (e.g. when using a calling card), or if the dialing string contains special characters and com- mands, you will need to dial manually to make the modem connection:

1.Tap Start, then tap Programs, and then double-tap the Communications folder.

2.Double-tap the Remote Networking folder, then tap to highlight the connection which you want to set up for manual dialing.

3.Tap File, then tap the Properties button on the toolbar.

WorkingwithHPPrePalm-InstalledopPCApplicationsUserGuide-147