Chapter 3

(continued)

Media

(1) Left

(2) Right

(3) Top

(4) Bottom

 

 

margin

margin

margin

margin

B5

 

 

 

 

A5

 

 

 

 

Cards

 

 

 

 

Custom-sized media

 

 

 

 

Photo media

 

 

 

 

Envelopes

3.3 mm (0.13

3.3 mm (0.13

16.5 mm

16.5 mm

 

 

inch)

inch)

(0.65 inch)

(0.65 inch)

 

 

 

 

 

 

 

 

 

 

 

 

NOTE: If you are using the duplexer, the minimum top and bottom margins must match or exceed 12 mm (0.47 inch).

Load media

This section provides instructions for loading media into the device.

NOTE: Tray 2 is available with some models. For ordering information, see Order printing supplies online.

To load Tray 1 (main tray)

1.Lift the output tray.

2.Insert the media print-side down in the center of the tray. Make sure the stack of media aligns with the line on the width guide, and is not higher than the paper stack line on the guide.

NOTE: Do not load paper while the device is printing.

40 Use the device

Page 44
Image 44
HP Pro 8500 - A909a, Pro 8500 - A909g, Pro 8500 Premier - A909n, Pro 8500 - A909b manual Load media, To load Tray 1 main tray