HP Pro 8500 - A909a manual Set the fax speed, To set the fax speed from the device control panel

Chapter 8

To set the redial options via the device control panel

▲Device control panel: Press Setup, press Advanced Fax Setup, and then use the Busy Redial or No Answer Redial options.

To set the redial options via the embedded Web server

1.Embedded Web server (network connection): Click the Settings tab, and then click Advanced Fax Setup in the left pane.

2.Make a selection in the Busy Redial and No Answer Redial drop-down menus.

3.Click the Apply button.

Set the fax speed

You can set the fax speed used to communicate between your device and other fax machines when sending and receiving faxes. The default fax speed is Fast.

If you use one of the following, setting the fax speed to a slower speed might be required:

•An Internet phone service

•A PBX system

•Fax over Internet Protocol (FoIP)

•An integrated services digital network (ISDN) service

If you experience problems sending and receiving faxes, you might want to try setting the Fax Speed setting to Medium or Slow. The following table provides the available fax speed settings.

Fax speed setting	Fax speed
Fast	v.34	(33600 baud)
Medium	v.17	(14400 baud)
Slow	v.29	(9600 baud)

To set the fax speed from the device control panel

1.Press (Setup).

2.Select Advanced Fax Setup, and then select Fax Speed.

3.Select an option using the arrow keys, and then press OK.

To set the fax speed via the embedded Web server

1.Embedded Web server (network connection): Click the Settings tab, and then click Basic Fax Setup in the left pane.

2.Make a selection in the Fax Speed drop-down menu.

3.Click the Apply button.

96 Fax