HP Pro 8500 - A909a manual Store printing supplies, Clean the device, Store ink cartridges

Models: Pro 8500 - A909a Pro 8500 - A909b Pro 8500 Premier - A909n Pro 8500 - A909g

1 306
Download 306 pages 34.1 Kb
Page 188
Image 188

Chapter 11

6.Remove the new printhead from its package, and then remove its orange protective caps.

CAUTION: Do not shake printheads after the caps are removed.

7.Insert the printhead into its color-coded slot (the label on the printhead must match the label on the printhead latch). Press down firmly on the printhead to ensure proper contact.

8.Pull the printhead latch all the way forward, and then press down to ensure that the latch is properly engaged. You might have to apply some pressure to engage the latch.

9.Close the top cover.

10.Wait while the device initializes the printheads and prints the alignment pages. If the device does not print the pages, start the alignment process manually. For more information, see To align the printheads.

Store printing supplies

This section covers the following topics:

Store ink cartridges

Store printheads

Store ink cartridges

Ink cartridges can be left in the device for extended periods of time. If you remove the ink cartridges, place them in an airtight container, such as a resealable plastic bag.

Store printheads

Printheads can be left in the device for extended periods of time. However, to assure optimal printhead health, be sure to turn off the device properly. For more information, see Turn off the device.

Clean the device

This section provides instructions for keeping the device in top working condition. Perform these maintenance procedures as necessary.

184 Maintain and troubleshoot

Page 188
Image 188
HP Pro 8500 - A909a, Pro 8500 - A909g Store printing supplies, Clean the device, Store ink cartridges, Store printheads