Chapter 10

To set the device to be visible or not visible to Bluetooth devices

You can set the device to be either visible to Bluetooth devices (public) or not visible to any (private).

Visible: Any Bluetooth device within range can print to the device.

Not visible: Only Bluetooth devices that have stored the device address of the all- in-one can print to it.

NOTE: The device ships with a default accessibility level of Visible.

To set the device to be not visible from the control panel

1.Press Setup on the control panel.

2.Select Bluetooth, and then select Visibility.

3.Use the arrow buttons to select Not Visible, and then press OK.

The all-in-one is inaccessible to Bluetooth devices that have not stored its device address.

To set the device to be not visible from the embedded Web server

Open the embedded Web server, click the Bluetooth tab, select Not Visible in the Visibility section, and then click Apply.

Reset Bluetooth settings via the embedded Web server

To reset Bluetooth settings on the device to the factory defaults:

1.Open the embedded Web server, and then click the Bluetooth tab.

2.Click Reset Bluetooth in the Reset Bluetooth section, and then click Apply.

Uninstall and reinstall the software

If your installation is incomplete, or if you connected the USB cable to the computer before prompted by the software installation screen, you might need to uninstall and then reinstall the software. Do not simply delete the device application files from your computer. Make sure to remove them properly, using the uninstall utility provided when you installed the software that came with the device.

To uninstall from a Windows computer, method 1

1.Disconnect the device from your computer. Do not connect it to your computer until after you have reinstalled the software.

2.Press the Power button to turn off the device.

3.On the Windows taskbar, click Start, select Programs or All Programs, select HP, select the HP device, and then click Uninstall.

4.Follow the onscreen instructions.

5.If you are asked whether you would like to remove shared files, click No.

Other programs that use these files might not work properly if the files are deleted.

6.Restart your computer.

172 Configure and manage

Page 176
Image 176
HP Pro 8500 - A909a manual Uninstall and reinstall the software, To set the device to be not visible from the control panel