Set the fax error correction mode
Typically, the device monitors the signals on the phone line while it is sending or receiving a fax. If it detects an error signal during the transmission and the error- correction setting is on, the device can request that a portion of the fax be resent.
Turn off error correction only if you are having trouble sending or receiving a fax, and you want to accept the errors in the transmission. Turning off the setting might be useful when you are trying to send a fax to another country/region, when you receive a fax from another country/region, or if you are using a satellite phone connection.
To set the fax
▲Device control panel: Press FAX, select Advance Fax Setup menu, and then select Error correction mode.
To set the fax
1.Embedded Web server: Click the Settings tab, and then click Advanced Fax Setup in the left pane.
2.Select On or Off in the Error Correction Mode
3.Click the Apply button.
Set the dial type
Use this procedure to set
NOTE: The
To set the dial type via the device control panel
▲Device control panel: Press Setup, press Basic Fax Setup, and then use the Tone or Pulse Dialing option.
To set the dial type via the embedded Web server
1.Embedded Web server (network connection): Click the Settings tab, and then click Basic Fax Setup in the left pane.
2.Make a selection in the Tone or Pulse Dialing
3.Click the Apply button.
Set the redial options
If the device was unable to send a fax because the receiving fax machine did not answer or was busy, the device attempts to redial based on the settings for the busy- redial and
•Busy redial: If this option is turned on, the device redials automatically if it receives a busy signal. The
•No answer redial: If this option is turned on, the device redials automatically if the receiving fax machine does not answer. The
Change fax settings | 95 |