3Press Menu/OK to save the setting and return to the Setup Menu.
The new setting remains in effect until
it is changed again, even when you turn the camera off.
Focus Assist Light
Sometimes in
The default Focus Assist Light setting is Auto.
1In the Setup Menu (page 115), select Focus Assist Light.
2In the Focus Assist Light
3Press Menu/OK to save the setting and return to the Setup Menu.
NOTE HP recommends leaving this setting at Auto, since turning it off hinders the ability of the camera to focus correctly in low light.
The new setting remains in effect until it is changed again, even when you turn the camera off.
Chapter 6: Using the Setup Menu | 117 |