HP R707 manual Setting the Date and Time

Setting the Date and Time

The camera has a clock that records the date and time at which you take each picture. This information is recorded in the image properties, which you can see when viewing the image in the Image Info screen (page 92), in the Playback menu screen (page 86), or on your computer. You can also choose to have the date and time imprinted on the visible image (see Date & Time Imprint on page 76).

The first time you turn the camera on, a Data & Time screen appears after you choose the language, prompting you to set the date and time.

1Adjust the value of the highlighted

selection using the buttons.

2Press the buttons to move to the other selections.

3Repeat steps 1 and 2 until the correct date/time format, date, and time are set.

4Press the Menu/OK button when you have entered the proper values for the date and time. A confirmation screen appears, asking if the correct date and time have been set.

5If the date and time are correct, press the Menu/OK button to select Yes.

If the date and time are incorrect, press the button to highlight No, and then press the Menu/OK button. The Date & Time screen appears again. Repeat steps 1 through 5 to set the correct date and time.

NOTE If you need to change the date and time settings later, you can do this with the Date & Time setting in the Setup menu. See Chapter 6: Using the Setup Menu on

page 115.

18 HP Photosmart R707 User’s Manual