Your camera came with the ArcSoft® Panorama Maker™ software that automatically stitches the images in the panoramic sequence together on your computer during image transfer. The Panorama Maker software was automatically installed on your computer during the HP Image Zone software installation process (see Installing the Software on page 19). To transfer the panoramic sequence of images from your camera to your computer so that the ArcSoft Panorama Maker software can stitch the images together, see Transferring Images to a Computer on page 109.

Taking a Panoramic Sequence of Pictures

1Press the Mode button on top of the camera until the Panorama

mode appears in the Image Display. The camera switches to

Live View with displayed in the Image Display. You are now ready to take the first picture in your panoramic sequence.

NOTE Panorama images are stitched together from left to right, so your first image must be at the left-most end of the panorama view.

2Press the Shutter button to take the first picture in the panoramic sequence. After Instant Review, the camera switches to Live View with

displayed in the Image Display.

50

HP Photosmart R707 User’s Manual