Charging the Battery

NOTE This section tells how to charge a battery in the camera. You can also charge the battery in the extra battery bay of the camera dock or in the HP Photosmart Quick Recharger (see Appendix B: Purchasing Camera Accessories on page 173).

If the battery you installed is a disposable CP1 battery, you can skip this step. If the battery you installed is a rechargeable lithium ion battery, do the following.

1Plug the power cord into the HP AC adapter. If more than one power cord is in the box, use the cord that is appropriate for power outlets in your country. Plug the other end of the power cord into an electrical outlet.

2Open the small rubber door on the side of the camera.

3Attach the thin cord from the AC adapter to the power adapter connector

on the side of the camera as shown.The Power/Memory light on the back of the camera

will start blinking to show that the battery is charging.

The rechargeable lithium ion battery will usually charge fully in 5-7 hours. When the Power/Memory light stops blinking, the battery is fully charged, and you can then unplug the power adapter from the camera. You can continue to use the camera while the battery is being charged by the power adapter.

16

HP Photosmart R707 User’s Manual