HP Photosmart R707 FLASH, Macro, CLOSE, Macro, Macro, Message, Solution, CHARGING, of Macro, Settings, Blinking, FOCUS TOO, PROCESSING, Macro mode, and blinking, Normal focus

Message	Possible cause	Solution
PROCESSING...	The camera is	Wait a few seconds for the
	processing data,	camera to finish
	such as saving	processing before taking
	the last picture	another picture or pressing
	you took.	another button.
CHARGING	The camera is	It takes longer to charge
FLASH...	recharging the	the flash when the battery
	flash.	is low. If you see this
		message a lot, you may
		need to replace or
		recharge the battery.
FOCUS TOO FAR	The focus	! Set the camera to
and blinking	distance is	Normal focus.
	beyond where the	! Move closer to the
	camera can focus	subject, within the range
	in Macro mode.	of Macro		focus (see
		Using the Focus Range
		Settings on page 38).
FOCUS TOO	The focus	Move farther away from
CLOSE	distance is closer	the subject (within the
	than the camera	range of Macro		focus -
	can focus in	see page 38).
	Macro mode.
Blinking	The focus	Set the camera to
	distance is closer	Macro	focus or move
	than the camera	farther away.
	can focus without
	being in Macro
	mode.

Chapter 7: Troubleshooting and Support 145