HP R707 manual Attaching the Ferrite to AC Adapter Cord

Attaching the Ferrite to the

AC Adapter Cord

A ferrite is included in the box with your camera. This ferrite prevents your camera from emitting radio frequency energy that might interfere with the reception of your radio, television, or other electronic devices which might be near the camera. The ferrite

will not degrade the performance or safety of the camera.

Attach the ferrite to the thin HP AC adapter cord (the cord that attaches to the camera, not the cord that attaches to the wall) in the following way:

1Wrap the cord around the ferrite so that the cord passes through the ferrite two times (as shown here).

2Adjust the cord so that the edge of the ferrite is 10 cm (4 inches) from the end of the connector that connects to the camera (or camera dock).

3Close the ferrite so that it snaps snugly into place around the cord.

Chapter 1: Getting Started 15