HP XC System 4.x Software 123

Modifying absolute priority scheduling options

bmod -aps "system=value" job_ID

bmod -aps "admin=value" job_ID

bmod -apsn

Administrators can use bmod -apsto adjust the APS value for pending jobs. bmod -apsncancels previous bmod -apssettings. You cannot combing bmod -apswith other bmod options.

Set a static non-zero APS value of a pending job. Setting a system APS value overrides any calculated APS value for the job. The system APS value cannot be applied to running jobs.

Set a non-zero ADMIN factor value for a pending job. The ADMIN factor adjusts the calculated APS value higher or lower. A negative admin value is lowers the calculated APS value, and a positive value raises the calculated APS value relative to other pending jobs in the APS queue.

You cannot configure APS weight, limit, or grace period for the ADMIN factor. The ADMIN factor takes effect as soon as it is set.

Run bmod -apsnto cancel previous bmod -apssettings. You cannot apply bmod -apsnon running jobs in an APS queue. An error is issued if the job has no system APS priority or ADMIN factor set.

Options

job_ID "job_ID[index]"

Modifies jobs with the specified job ID.

Modifies job array elements specified by "job_ID[index]".

-hPrints command usage to stderr and exits.

-VPrints LSF release version to stderr and exits.

Limitations

Modifying remote running jobs in a MultiCluster environment is not supported.

If you do not specify -eor -eobefore the job is dispatched, you cannot modify the name of job error file for a running job. Modifying the job output options of remote running jobs is not supported.