lsfstartup

lsfstartup

starts LIM, RES, sbatchd, and mbatchd on all hosts in the cluster

Synopsis

lsfstartup [-f ] lsfstartup [-h -V]

Description

CAUTION: This command can only be used by root or users listed in lsf.sudoers.

Starts LIM, RES, sbatchd, and mbatchd, in that order, on all hosts.

By default, prompts for confirmation of the next operation if an error is encountered.

If LSF daemons are already running, use lsfrestart instead, or use lsfshutdown and shut down the running daemons before you use lsfstartup.

In order to be able to control all daemons in the cluster:

◆The file /etc/lsf.sudoers has to be set up properly.

◆You must be able to run the rsh or ssh command across all LSF hosts without having to enter a password. See your operating system documentation for information about configuring the rsh and ssh commands.

The shell command specified by LSF_RSH in lsf.conf is used before rsh is tried.

Options

-fForce mode. Continues to start daemons even if an error is encountered.

-hPrints command usage to stderr and exits.

-VPrints LSF release version to stderr and exits.

See also

lsadmin(8), badmin(8), lsfshutdown(8), lsfrestart(8), lsf.sudoers(5)

242Platform LSF Command Reference