See also

1 LOG_DEBUG1 level for extended logging. A higher level includes lower logging levels. For example, LOG_DEBUG3 includes LOG_DEBUG2 LOG_DEBUG1, and LOG_DEBUG levels.

2LOG_DEBUG2 level for extended logging. A higher level includes lower logging levels. For example, LOG_DEBUG3 includes LOG_DEBUG2 LOG_DEBUG1, and LOG_DEBUG levels.

3LOG_DEBUG3 level for extended logging. A higher level includes lower logging levels. For example, LOG_DEBUG3 includes LOG_DEBUG2, LOG_DEBUG1, and LOG_DEBUG levels.

Default: 0 (LOG_DEBUG level in parameter LS_LOG_MASK)

-flogfile_name

Specifies the name of the file where debugging messages are logged. The file name can be a full path. If a file name without a path is specified, the file is saved in the LSF system log directory.

The name of the file has the following format:

logfile_name.daemon_name.log.host_name

On UNIX, if the specified path is not valid, the log file is created in the /tmp directory.

On Windows, if the specified path is not valid, no log file is created.

Default: current LSF system log file in the LSF system log file directory.

-o

Turns off temporary debug settings and resets them to the daemon starting state. The message log level is reset back to the value of LS_LOG_MASK and classes are reset to the value of LSB_DEBUG_BLD. The log file is also reset back to the default log file.

If a collector name is not specified, default value is to restore the original log mask and log file directory for the default collector.

collector_name ... all

Specifies the collector names separated by blanks. all means all the collectors.

-hPrints command usage to stderr and exits.

-VPrints release version to stderr and exits.

See also

blhosts, lsf.licensescheduler, lsf.conf

84Platform LSF Command Reference