IBM 8682 manual Dual fan mount assembly with cable, Before you begin, FRU information service only

Dual fan mount assembly with cable

Before you begin:

vRead “Safety information” on page 127

vReview the information in “Before you begin” on page 50

Note: To remove the fan housing assembly with card guides (for four fans), see step 4 on page 57

Holding screws

Dual fan mount assembly

To remove the dual fan mount assembly with cable, do the following:

1.Power-off the server, if it is on.

2.Unplug the server.

3.Remove the top cover (see “Removing the server top cover and bezel” on page 53).

4.Disconnect the dual fan mount cable.

5.Remove the two holding screws.

6.Gently lift the fan mount assembly out of the server.

FRU information (service only) 91