IBM 8682 manual PCI switch card, Before you begin

PCI switch card

Before you begin:

vRead “Safety information” on page 127

vReview the information in “Before you begin” on page 50

Switch card latches

Switch card assembly

1.Power-off the server, if it is on.

2.Disconnect the server from the electrical outlet.

3.Remove the top cover (see “Removing the server top cover and bezel” on page 53).

4.Disconnect the switch card cable from the system board.

5.Disengage the switch card:

a.Press the switch card latches toward the front and sides of the server.

b.Push the latches through the notches.

6.When the switch card latches have been disengaged from the notches, gently pull the switch card free and lift it up and out of the server.

Note: You may have to tilt the top of the switch card toward the front of the server when removing it.

7.To replace the switch card, reverse the steps above.

FRU information (service only) 93