IBM 8682 manual Service processor card assembly, Before you begin

Service processor card assembly

Before you begin:

vRead “Safety information” on page 127

vReview the information in “Before you begin” on page 50

Holding screws

Service processor card assembly

To remove the service processor card assembly, do the following:

1.Power-off the server, if it is on.

2.Unplug the server.

3.Remove the top cover (see “Removing the server top cover and bezel” on page 53).

4.Remove the dual fan mount assembly (see “Dual fan mount assembly with cable” on page 91).

5.Remove the two holding screws.

6.Gently lift the service processor card away from the system board and out of the server.

92IBM xSeries 350 Type 8682: Hardware Maintenance Manual