IBM manual IBM xSeries 350 Type 8682 Hardware Maintenance Manual

Error Code/Symptom	FRU/Action
020-XXX-002	1. PCI Hot-Swap Latch Assembly
(Failed Hot-Swap Slot 2 PCI Latch test)	2.	System Board
020-XXX-003	1. PCI Hot-Swap Latch Assembly
(Failed Hot-Swap Slot 3 PCI Latch test)	2.	System Board
020-XXX-004	1. PCI Hot-Swap Latch Assembly
(Failed Hot-Swap Slot 4 PCI Latch test)	2.	System Board
020-XXX-005	1. PCI Hot-Swap Latch Assembly
(Failed Hot-Swap Slot 5 PCI Latch test)	2.	System Board
020-XXX-006	1. PCI Hot-Swap Latch Assembly
(Failed Hot-Swap Slot 6 PCI Latch test)	2.	System Board
030-XXX-000	1.	System Board
(Failed Internal SCSI interface test)
030-XXX-00N	1. Adapter in Slot N
(Failed SCSI test on PCI slot N. Check
system error log before replacing a FRU.)
035-XXX-099	1. No adapters were found.
	2. If adapter is installed re-check connection.
035-XXX-S99	1.	Adapter
(Failed RAID test on PCI slot S. S =	2.	SCSI Backplane
number of failing PCI slot. Check System	3.	Cable
Error Log before replacing a FRU.)
035-XXX-SNN	1. Fixed Disk with SCSI ID NN on RAID adapter in PCI slot S.
(Check System Error Log before
replacing a FRU. S = number of failing
PCI slot; NN = SCSI ID of failing fixed
disk.)
035-253-S99	1. ServeRAID Adapter in slot S is not configured properly. Obtain the
(RAID adapter initialization failure)		basic and extended configuration status and refer to the ServeRAID
		Hardware Maintenance Manual for more information.
	2.	Cable
	3.	SCSI Backplane
	4.	Adapter
075-XXX-000	1.	Power Supply
(Failed Power Supply test)
089-XXX-001	1.	Microprocessor
(Failed Microprocessor test)
089-XXX-002	1.	Optional Microprocessor 2
(Failed Optional Microprocessor test)
089-XXX-003	1.	Optional Microprocessor 3
(Failed Optional Microprocessor test)

104IBM xSeries 350 Type 8682: Hardware Maintenance Manual