IBM 8682 manual Four-fan housing, Before you begin

Four-fan housing

Before you begin:

vRead “Safety information” on page 127

vReview the information in “Before you begin” on page 50

Release latches

Fan housing

To remove the four-fan housing, do the following:

1.Power-off the server, if it is on.

2.Unplug the server.

3.Remove the top cover (see “Removing the server top cover and bezel” on page 53).

4.Remove the four fan assemblies.

5.Remove all adapters from the Active PCI adapter slots.

6.Remove the plastic dividers between the PCI adapter slots.

7.Press the fan assembly release latches on both sides of the fan assembly; then, remove the fan assembly from the server.

90IBM xSeries 350 Type 8682: Hardware Maintenance Manual