1 Description

Server Board Features

The SE7500WV2 is available in either SCSI or ATA hard drive interface versions as described in Table 1. The features listed in Table 2 are common to both server board versions.

Table 1. Server Board Versions

Feature

SCSI

ATA

Description

Dual channel Ultra160 LVD SCSI accessible at rear panel I/O and internally

Dual channel ATA 100 RAID

NOTE

The feature set listed in Table 2 only reflects usage with either the 1U

Intel® SR1300 or the 2U Intel® SR2300 server chassis. Third-party or OEM chassis may not provide all of the features listed below.

Table 2. Server Board Features

Feature

Processors

Memory

Graphics

Video Memory

PCI bus

Network

System I/O (See Table 1)

Form Factor

Description

Dual processor slots supporting Intel® Xeon™ processors in an INT3/FCPGA Socket 604 package.

Six dual inline memory module (DIMM) slots support:

DDR-200 or DDR-266 compliant, ECC, registered, 72-bit, 168-pin, DIMMs

From 256MB to 12 GB of memory

Integrated onboard ATI RAGEXL PCI SVGA controller.

8 MB SDRAM of video memory.

Two PCI riser slots capable of supporting either of the following configurations:

1U configuration-one full-length, full-height 64-bit PCI riser slot and one Low Profile (LP) 64-bit PCI riser slot.

2U configuration-three full-length, full-height 64-bit PCI riser slots and three LP 64-bit PCI riser slots.

Dual on-board 10/100/1000 Network Interface Controllers (NIC).

One PS/2keyboard/mouse port (6 pin DIN).

One VGA video port (15 pin).

Two external USB ports, internal header providing two additional USB. One external serial port (RJ-45), one internal COM 1 header.

One external SCSI port (SCSI server board only), one internal.

Two NIC ports (RJ-45).

Server ATX form factor.

7

Page 7
Image 7
Intel SE7500WV2 manual Description, Server Board Features, Server Board Versions