JBL SDP-40 Listening Mode Descriptions, Film, Mode Adjust, Default, Possible, Parameter, Setting

SDP-40

MODE ADJUST

LISTENING MODE DESCRIPTIONS

The SDP-40 offers an assortment of listening modes for 2-channel, Dolby Digital, dts(-ES), and analog sources. Listening mode descriptions begin below and continue in the order shown on the MODE ADJUST menu. The table included with each description indicates the corresponding listening mode menu parameters, as well as their factory-default and possible parameter settings. All listening mode menus are shown in the Appendix beginning on page A-14. Listening mode menu parameter descriptions begin on page 5-34.

FILM

MODE ADJUST L7 FILM

•A proprietary listening mode.

•Designed for enhanced playback of 2-channel stereo or matrix- encoded film sources.

•Derives seven channels from 2-channel sources, as well as full- frequency stereo surround channels that realistically increase the perceived width, length, and sense of envelopment of the listening space.

•Provides remarkable improvement compared to other decoders.

•Recommended for 2-channel stereo or matrix-encoded film sources.

	Default	Possible
Parameter	Setting	Settings
AUTO AZIMUTH	ON	ON, OFF
VOCAL ENHANCE	+0.0dB	+6.0dB, +3.0dB, +0.0dB
RE-EQUALIZER	ON	ON, OFF
SOUND STAGE	REAR	FRONT, NEUTRAL, REAR
5 SPKR ENHANCE	ON	ON, OFF
BASS ENHANCE	OFF	ON, OFF
SURR ROLLOFF	15.3kHz	500Hz to 20.0kHz, OFF
REAR DLY OFFSET	15ms	OFF, 1 to 30ms
OUTPUT LEVELS	Refer to page 5-32
CUSTOM	Refer to page 5-33

Listening mode menu parameter descriptions begin on page 5-34.

5-5