JBL SDP-40 manual Mode Adjust, Dolby Digital Surround EX, Default, Possible, Parameter, Setting

MODE ADJUST

JBL

DIGITAL EX & DIGITAL (continued from page 5-19)

MODE ADJUST @*DIGITAL EX

OR @*DIGITAL

When Dolby Digital Surround EX decoding is engaged:

Note:

The SDP-40 cannot automatically detect Dolby Digital Surround EX encoding in non-flagged 5.1- channel Dolby Digital sources. A non-flagged input source does not include information in the input signal

that identifies Dolby Digital Surround EX encoding.

•Designed for playback of 5.1-channel Dolby Digital sources. The DIGITAL EX listening mode is recommended for Dolby Digital sources recorded with Dolby Digital Surround EX encoding. This listening mode can also be used with 5.1-channel Dolby Digital sources with mixed results.

•Decodes 5.1 discrete channels from 5.1-channel Dolby Digital sources. The five main channels are full frequency. The .1 channel, often referred to as LFE information, has a limited frequency range of 120Hz.

•Applies matrix decoding to derive a surround back channel from the other surround channels.

	Default	Possible
Parameter	Setting	Settings
EX DECODING	AUTO	AUTO, ON, OFF
COMPRESSION	OFF	AUTO, ON, OFF
LFE MIX	+0.0dB	-10.0 to +0.0dB
OUTPUT LEVELS	Refer to page 5-32
CUSTOM	Refer to page 5-33

Listening mode menu parameter descriptions begin on page 5-34.

Input Source	5.1-Channel	5.1-Channel	5.1-Channel
		Dolby Digital Surround EX	Dolby Digital Surround EX
	Dolby Digital
Parameter Setting		(Flagged)	(Non-Flagged)
EX DECODING: AUTO	DIGITAL	DIGITAL EX	DIGITAL

EX DECODING: ON

DIGITAL EX

DIGITAL EX

DIGITAL EX

EX DECODING: OFF

DIGITAL

DIGITAL

DIGITAL

5-20