JBL SDP-40 manual Assigning Audio & Video Input Connectors, Setup, Parameter, Possible Settings

SETUP

JBL

ASSIGNING AUDIO & VIDEO INPUT CONNECTORS

The SDP-40 has 12 configurable inputs, each of which can be assigned to its 13 digital audio, 8 analog audio, 5 composite video, 8 S-video, or 4 component video input connectors.

MAIN MENU

MODE ADJUST AUDIO CONTROLS SETUP

SETUP

INPUTS SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGERS

LOCK OPTIONS

INPUT SETUP

DVD1

DVD2

LD

TV

SAT

VCR

CD

PVR

GAME

TAPE

TUNER

AUX

DVD1 INPUT SETUP

	NAME				DVD1
DIGITAL IN				COAX-1
	ANALOG IN				NONE
	ANLG IN LVL				AUTO
	VIDEO IN		S-VIDEO-1
	COMPONENT IN			1
	2-CH				FILM
	D	5.1			FILM
					FILM
	5.1a	5.1a			FILM
	MAIN ADVANCED
	ZONE2 IN			DIGITAL
	RECORD IN			DIGITAL

RECORD ADVANCED

DVD1 DIGITAL IN

COAX-1

COAX-2

COAX-3

COAX-4

COAX-5

COAX-6

OPTICAL-1

OPTICAL-2

OPTICAL-3

OPTICAL-4

OPTICAL-5

OPTICAL-6

AES/EBU

NONE

The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted.

The table below indicates the INPUT SETUP menu parameters that can be used to assign audio and video input connectors. The ANLG IN LVL parameter can be used to adjust 2-channel analog audio input levels for the selected input.

Parameter	Possible Settings
DIGITAL IN	COAX-1 to 6, OPTICAL-1 to 6, AES/EBU, NONE
ANALOG IN	ANALOG-1 to 8, 5.1 ANLG (6-8), NONE
ANLG IN LVL	AUTO, -18 to +12dB
VIDEO IN	COMPOSITE-1 to 5, S-VIDEO-1 to 8, NONE
COMPONENT IN	COMPONENT-1 to 4, NONE

DIGITAL IN COAX-1 to 6, OPTICAL-1 to 6, AES/EBU, NONE

SETUP INPUTS DVD1 DIGITAL IN

Opens the DIGITAL IN menu shown above, which can be used to assign a digital audio input connector for the selected input. A digital audio input connector must be assigned if no analog audio input connector is assigned.

Note:

The digital audio input connectors are compatible with PCM (44.1, 48, 88.2, and 96kHz), Dolby Digital, and dts(-ES) sources. The digital audio input connectors are not compatible with MPEG or MP3 sources.

3-6