JBL SDP-40 manual 5.1 2-CHANNEL, Mode Adjust, Default, Possible, Parameter, Settings

SDP-40

MODE ADJUST

5.1 2-CHANNEL

MODE ADJUST 5.1 2-CHANNEL

•Designed for converting 5.1-channel Dolby Digital input signals into 2-channel LOGIC7-encoded output signals.

•Sends downmixed 5.1-channel Dolby Digital input signals to the front speakers and the subwoofer.

•Recommended for recording purposes.

	Default	Possible
Parameter	Setting	Settings
CENTER MIX	+0dB	-25 to +5dB
SURROUND MIX	+0dB	-5 to +5dB
CNTR DLY SAMPLES	+0	-127 to +127
MASTER LEVEL	+0dB	-5 to +5dB
COMPRESSION	OFF	AUTO, ON, OFF
LFE MIX	+0.0dB	-20.0 to +0.0dB
SUB L/R LVL	+0dB	OFF, -30 to +12dB
CUSTOM	Refer to page 5-33

Listening mode menu parameter descriptions begin on page 5-34.

5.1 MONO LOGIC

MODE ADJUST 5.1 MONO LOGIC

•Designed for playback of Dolby Digital mono sources.

•Uses proprietary reverb algorithms to realistically expand mono sources to use all channels,dramatically increasing the perceived width and sense of envelopment of the listening space.

	Default	Possible
Parameter	Setting	Settings
EFFECT LVL	-9dB	-12 to +6dB
ACADEMY FILTER	ON	ON, OFF
SURR ROLLOFF	3.1kHz	500Hz to 20.0kHz, OFF
OUTPUT LEVELS	Refer to page 5-32
CUSTOM	Refer to page 5-33

Listening mode menu parameter descriptions begin on page 5-34.

Note:

•When a 1.0 Dolby Digital source is present, the SDP-40 automatically activates the 5.1 MONO LOGIC listening mode.

•When the Shift command bank is activated, pressing the TVL button activates the 5.1 MONO LOGIC listening mode for 5.1-channel sources.

5-21