JBL SDP-40 manual Mode Adjust, 5.1a MUSIC, Default, Possible, Parameter, Settings

MODE ADJUST

JBL

5.1a MUSIC

MODE ADJUST 5.1a @** MUSIC

•Designed for playback of 5.1-channel analog music sources.

•The 5.1a MUSIC listening mode is not available unless both side and rear speakers are present.

•Applies ASA processing to signals sent to the rear speakers. Refer to the ASA parameter description on page 3-31 for more information.

	Default	Possible
Parameter	Setting	Settings
LFE MIX	+0.0dB	-10.0 to +0.0dB
OUTPUT LEVELS	Refer to page 5-32
CUSTOM	Refer to page 5-33

Listening mode menu parameter descriptions begin on page 5-34.

Note:

The 5.1a MUSIC listening mode can only be activated with the front panel or remote control Mode buttons.

5.1a STANDARD

MODE ADJUST 5.1a STANDARD

•Designed for playback of 5.1-channel analog sources.

•Converts 5.1-channel analog input signals into digital audio for internal processing.

•Allows 5.1-channel analog sources to use bass management, speaker crossovers, speaker distance calibration, and audio controls (tone controls). When these features are not used, the 5.1a STANDARD listening mode is similar to the 5.1a BYPASS listening mode.

•Sends identical signals (with appropriate time delays) to the Main Zone audio output connectors labeled Side L and Rear L as well as Side R and Rear R.

Parameter

OUTPUT LEVELS	Refer to page 5-32
CUSTOM	Refer to page 5-33

Listening mode menu parameter descriptions begin on page 5-34.

5-30