JBL SDP-40 manual Music, Mode Adjust, Default, Possible, Parameter, Settings

MODE ADJUST

JBL

MUSIC

MODE ADJUST @@ @** MUSIC

•Designed for playback of 5.1-channel dts music sources.

•The MUSIC listening mode is not available unless both side and rear speakers are present.

•Applies ASA processing to signals sent to the rear speakers. Refer to the ASA parameter description on page 3-31 for more information.

•Recommended for home theaters.

	Default	Possible
Parameter	Setting	Settings
LFE MIX	+0.0dB	-10.0 to +0.0dB
OUTPUT LEVELS	Refer to page 5-32
CUSTOM	Refer to page 5-33

Listening mode menu parameter descriptions begin on page 5-34.

Note:

The MUSIC listening mode can only be activated with the front panel or remote control Mode buttons.

&

MODE ADJUST @@@*

•Listening mode name differs depending on the encoding

present in the input source, the DECODING parameter setting, and the speaker setup. Refer to page 5-22 for more information.

•Designed for playback of 5.1-channel dts, 5.1-channel matrix- encoded dts-ES, and 6.1-channel discrete-encoded dts-ES sources.

•Decodes 5.1 matrix or 6.1 discrete channels from dts(-ES) sources. The six main channels are full frequency. The .1 channel, often referred to as LFE information, has a limited frequency range of 120Hz.

•Appropriate for 5.1-channel dts, 5.1-channel matrix-encoded dts-ES, and 6.1-channel discrete-encoded dts-ES sources.

		Default	Possible
Parameter		Setting	Settings
LFE MIX		+0.0dB	-10.0 to +0.0dB
	DECODING	AUTO	AUTO, ON, OFF
OUTPUT LEVELS		Refer to page 5-32
CUSTOM		Refer to page 5-33

Listening mode menu parameter descriptions begin on page 5-34.

5-26