JBL SDP-40 manual Tilt Eq, Audio Controls, When the Shift command bank is activated

SDP-40

AUDIO CONTROLS

TILT EQ -3.0 to +3.0

TILT EQ

AUDIO CONTROLS TILT EQ

Controls the amount of tilt equalization applied to the Main Zone audio output connectors labeled Front L/R, Center, LFE, and Subwoofer L/R. This parameter setting affects the entire frequency spectrum with a hinge point at 1kHz. As the setting increases, frequencies higher than 1kHz are boosted while frequencies lower than 1kHz are simultaneously cut. As the setting decreases, frequencies higher than 1kHz are cut while frequencies lower than 1kHz are simultaneously boosted. The graph shown at the right indicates the frequency response of all TILT EQ parameter settings.

Note:

When the Shift command bank is activated:

•Pressing the GAME button increases the TILT EQ parameter setting in 0.2dB increments.

•Pressing the AUX button decreases the TILT EQ parameter setting 0.2dB increments.

•Pressing the OSD button sets the BASS, TREBLE, and TILT EQ parameters to +0.0dB.

+3.0

+2.8

+2.6

+2.4

+2.2

+2.0

+1.8

+1.6

+1.4

+1.2

+1.0

+0.8

+0.6

+0.4

+0.2 -0.0 -0.2 -0.4 -0.6 -0.8 -1.0 -1.2 -1.4 -1.6 -1.8 -2.0 -2.2 -2.4 -2.6 -2.8 -3.0

10	20	50	100	200	500	1k	2k
					Hz

+3.0

+2.8

+2.6

+2.4

+2.2

+2.0

+1.8

+1.6

+1.4

+1.2

+1.0

+0.8

+0.6

+0.4

+0.2

+0.0 -0.2 -0.4 -0.6 -0.8 -1.0 -1.2 -1.4 -1.6 -1.8 -2.0 -2.2 -2.4 -2.6 -2.8

-3.0

5k 10k 20k

The TILT EQ parameter controls the amount of tilt equalization applied to the Main Zone audio output connectors labeled Front L/R, Center, LFE, and Subwoofer L/R.

4-5