JBL SDP-40 manual Remote Only, Program Operation Parameters, Setup, On, Off

TRIGGER SETUP

TRIGGER 1	REMOTE
TRIGGER 2	REMOTE

TRIGGER 2 SETUP

REMOTE ONLY					OFF
DVD1					OFF
DVD2					OFF
LD					OFF
TV					OFF
SAT					OFF
VCR					OFF
CD					OFF
PVR					OFF
GAME					OFF
TAPE					OFF
TUNER					OFF
AUX					OFF
ZONE2 INPUTS					OFF
RECORD INPUTS					OFF
	FILM				OFF
	TV				OFF
	MUSIC				ON
	MUSIC SURR				ON
	PLII +				OFF
	PLII MOVIE				OFF
	PLII MUSIC				ON
	PRO LOGIC				OFF
				FILM	OFF
				MUSIC	OFF
NIGHTCLUB					OFF
CONCERT HALL					OFF
CHURCH					OFF
CATHEDRAL					OFF
PANORAMA					OFF
PARTY					ON
2-CHANNEL					OFF
MONO LOGIC					OFF
MONO SURROUND					OFF
MONO					OFF
5.1		FILM			OFF
5.1		TV			OFF
5.1		MUSIC			ON
5.1			SurEX		OFF
5.1			MUSIC		OFF
	DIGITAL EX				OFF
5.1 2-CHANNEL					OFF
5.1 MONO LOGIC					OFF
5.1 MONO SURR					OFF
5.1 MONO					OFF
				FILM	OFF
				MUSIC	ON
					OFF
				MUSIC	OFF
					OFF
			2-CHAN		OFF
5.1a			FILM		OFF
5.1a			MUSIC		OFF
5.1a				SurEX	OFF
5.1a				MUSIC	OFF
5.1a STANDARD					OFF
5.1a 2-CHANNEL					OFF
5.1a BYPASS					OFF
2CH BYPASS					OFF

SETUP	JBL
Trigger Setup (continued from page 3-48)
REMOTE ONLY	ON, OFF

SETUP TRIGGERS TRIGGER 1 OR TRIGGER 2 REMOTE ONLY

Configures the selected trigger output connector for remote operation. Select the ON setting to configure the selected connector for remote operation. Select the OFF setting to configure the selected connector for program operation. Refer to the Program Operation Parameter description below for more information.

When configured for remote operation, the connector labeled 1 can be activated and deactivated with the MODE + and – buttons when the Zone 2 command bank is activated, and the connector labeled 2 can be activated and deactivated with the MODE + and – buttons when the Record Zone command bank is activated.

Note:

When the REMOTE ONLY parameter is set to ON, all TRIGGER SETUP menu program operation parameter settings are ignored.

Program Operation Parameters ON, OFF

SETUP TRIGGERS TRIGGER 1 OR TRIGGER 2 Program Operation Parameter

Configure the selected trigger output connector for program operation when the REMOTE ONLY parameter is set to OFF. Select the ON setting to associate the selected connector with the corresponding input(s) or listening mode.

3-49