JBL SDP-40 manual Anlg In Lvl, Setup, Parameter, Possible Settings, SETUP INPUTS DVD1 ANLG IN LVL

SETUP

JBL

Assigning Audio & Video Input Connectors (continued from page 3-7)

MAIN MENU

MODE ADJUST AUDIO CONTROLS SETUP

SETUP

INPUTS

SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGERS

LOCK OPTIONS

INPUT SETUP

DVD1

DVD2

LD

TV

SAT

VCR

CD

PVR

GAME

TAPE

TUNER

AUX

DVD1 INPUT SETUP

	NAME				DVD1
	DIGITAL IN			COAX-1
	ANALOG IN				NONE
ANLG IN LVL					AUTO
	VIDEO IN		S-VIDEO-1
	COMPONENT IN			1
	2-CH				FILM
	D	5.1			FILM
					FILM
	5.1a	5.1a			FILM
	MAIN ADVANCED
	ZONE2 IN			DIGITAL
	RECORD IN			DIGITAL

RECORD ADVANCED

DVD1 ANLG IN LVL

AUTO									OFF
MANUAL								+0dB
AUTO GAIN								+0.0dB
	L		C	R		SL	SR	SB	LFE
dB
0
-6
-15		X	X		X	X	X	X	X
-30
-45

ON

OFF

-18 to +12dB

The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu may be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input may be substituted.

ANLG IN LVL AUTO, -18 to +12dB

SETUP INPUTS DVD1 ANLG IN LVL

Opens the ANLG IN LVL menu shown above, which can be used to adjust 2-channel analog audio input levels for the selected input. Despite attempts at standardization, analog sources still have a wide range of input levels. To compensate for this, the SDP-40 allows independent input level adjustment for each of its stereo analog audio input connectors. Input level adjustment is not available for the 5.1-channel analog audio input connector.

Parameter	Possible Settings
AUTO	ON, OFF
MANUAL	-18 to +12dB
AUTO GAIN*	-18 to +12dB

* This parameter cannot be adjusted.

Note:

ANLG IN LVL menu adjustments are applied to the stereo analog audio input connector assigned for the selected input. When another stereo analog audio input connector is assigned, these adjustments are automatically applied to the new connector.

3-8