JBL SDP-40 manual Installation Considerations, Do Not, Getting Started

Getting Started

JBL

INSTALLATION CONSIDERATIONS

The SDP-40 requires special care during installation to ensure optimal performance. Pay particular attention to the bulleted items that begin below and to other precautions that appear throughout this user guide.

DO

•Install the SDP-40 on a solid, flat, level surface such as a table , shelf, or in a standard 19-inch equipment rack using the enclosed rack-mount kit.

•Select a dry, well-ventilated location out of direct sunlight.

DO NOT

•Expose the SDP-40 to high temperatures, humidity, steam, smoke, dampness, or excessive dust. Avoid installing the SDP- 40 near radiators and other heat-producing appliances.

•Install the SDP-40 near unshielded TV or FM antennas, cable TV decoders, and other RF-emitting devices that might cause interference.

DO NOT (continued)

•Place the SDP-40 on a thick rug or carpet or cover the SDP-40 with a cloth, as this might prevent proper cooling.

•Place the SDP-40 on a windowsill or in another location in which it will be exposed to direct sunlight.

•Obstruct the front panel IR receiver. When the SDP-40 is not using the rear panel IR IN connector, the remote control must be in line-of-sight with the IR receiver for proper operation.

CAUTION Before moving the SDP-40, make sure it is powered off with the rear panel power switch. Then, make sure the power cord

is unplugged from the wall outlet.

1-4