JBL SDP-40 manual Music & Music, Mode Adjust, Default, Possible, Parameter, Settings

MODE ADJUST

JBL

MUSIC & MUSIC

MODE ADJUST @@@! L7 MUSIC OR @@ L7 MUSIC

•Listening mode name differs depending on the encoding

present in the input source, the DECODING parameter setting, and the speaker setup. Refer to page 5-22 for more information.

•A proprietary listening mode.

•Designed for enhanced playback of 5.1-channel dts, 5.1- channel matrix-encoded dts-ES, or 6.1-channel discrete- encoded dts-ES music sources.

•Similar to the FILM listening mode, but specifically tailored for music sources.

•Recommended for 5.1-channel dts, 5.1-channel matrix-encoded dts-ES, or 6.1-channel discrete-encoded dts-ES music sources.

		Default	Possible
Parameter		Setting	Settings
VOCAL ENHANCE		+0.0dB	+6.0dB, +3.0dB, +0.0dB
5 SPKR ENHANCE		ON	ON, OFF
BASS ENHANCE		OFF	ON, OFF
REAR DLY OFFSET		15ms	OFF, 1 to 30ms
LFE MIX		+0.0dB	-10.0 to +0.0dB
	DECODING	OFF	AUTO, ON, OFF
OUTPUT LEVELS		Refer to page 5-32
CUSTOM		Refer to page 5-33

Listening mode menu parameter descriptions begin on page 5-34.

ULTRA2 &

MODE ADJUST @@ @** ULTRA2 OR @@@! @**

Listening mode name differs depending on the encoding present in the input source, the DECODING parameter setting, and the speaker setup. The table at the bottom of the next page indicates the conditions in which THX ULTRA2 and dts-ES decoding are engaged.

•The ULTRA2 listening mode is available when THX Ultra2 decoding is engaged.

•THX Ultra2 decoding is engaged when the DECODING parameter is set to OFF or when the DECODING parameter is set to AUTO and a 5.1-channel dts source is detected.

•The listening mode is available when dts-ES decoding is engaged.

•dts-ES decoding is engaged when the DECODING parameter

is set to ON or when the DECODING parameter is set to AUTO and a 5.1-channel matrix-encoded or 6.1-channel discrete-encoded dts-ES source is detected.

•The ULTRA2 and listening modes are not available unless both side and rear speakers are present.

•Designed for playback of 5.1-channel dts, 5.1-channel matrix- encoded dts-ES, or 6.1-channel dts-ES discrete-encoded film sources.

•Allows 7-channel playback of 5.1-channel dts sources without dts-ES encoding.

•Applies THX re-equalization to simulate high-frequency rolloffs that occur in movie theaters. Most films are mixed for movie theaters, and might sound too bright when played back in home theaters without re-equalization.

5-24