JBL SDP-40 manual Bass, Audio Controls, When the Shift command bank is activated

SDP-40

AUDIO CONTROLS

BASS -6.0 to +6.0

AUDIO CONTROLS BASS

BASS

Controls the amount of low-frequency boost or cut applied to the Main Zone audio output connectors labeled Front L/R, Center, LFE, and Subwoofer L/R. The graph shown at the right indicates the frequency response of all BASS parameter settings.

Note:

When the Shift command bank is activated:

•Pressing the CD button increases the BASS parameter setting in 0.5dB increments.

•Pressing the TAPE button decreases the BASS parameter setting in 0.5dB increments.

•Pressing the OSD button sets the BASS, TREBLE, and TILT EQ parameters to +0.0dB.

+6.0

+5.5

+5.0

+4.5

+4.0

+3.5

+3.0

+2.5

+2.0

+1.5

+1.0

+0.5

+0.0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 -3.5 -4.0 -4.5 -5.0 -5.5 -6.0

10	20	50	100	200	500	1k	2k
					Hz

+0.0

5k 10k 20k

The BASS parameter controls the amount of low-frequency boost or cut applied to the Main Zone audio output connectors labeled Front L/R, Center, LFE, and Subwoofer L/R.

4-3