JBL SDP-40 manual Cal Noise, L/R Limiter, L/R Limit Adj, Lfe Limiter, Lfe Limit Adj, Setup

SDP-40

SETUP

CAL NOISE ON, OFF

SETUP SPEAKERS MANUAL LEVELS CALIBRATION BASS PEAK LIMITERS

CAL NOISE

Determines whether bass peak limiters are set with an internal or external calibration source. When ON is selected, the SDP-40 activates an internal calibration noise signal to set bass peak limiters. When OFF is selected, the SDP-40 deactivates the internal calibration noise signal. Setting bass peak limiters requires an external calibration source such as an audio calibration disc.

L/R LIMITER ON, OFF

SETUP SPEAKERS MANUAL LEVELS CALIBRATION BASS PEAK LIMITERS

L/R LIMITER

Limits low-frequency signals sent to the subwoofer or redirected to other speakers. When ON is selected, the SDP-40 restricts the output level of these signals according to the L/R LIMIT ADJ parameter setting. When OFF is selected, the SDP-40 does not restrict the output level of these signals, regardless of the L/R LIMIT ADJ parameter setting.

L/R LIMIT ADJ 75 to 120dB

SETUP SPEAKERS MANUAL LEVELS CALIBRATION BASS PEAK LIMITERS

L/R LIMIT ADJ

Specifies the output level restriction the SDP-40 applies to the Subwoofer L/R output connectors as well as to other Main Zone audio output connectors to which low-frequency signals are redirected. When the L/R LIMIT ADJ parameter is selected, it is automatically set to 75dB. The SDP-40 applies the selected output level restric- tion when the L/R LIMITER parameter is set to ON.

LFE LIMITER ON, OFF

SETUP SPEAKERS MANUAL LEVELS CALIBRATION BASS PEAK LIMITERS

LFE LIMITER

Limits low-frequency signals sent to the LFE subwoofer or redirected to other speakers. When ON is selected, the SDP-40 restricts the output level of these signals according to the LFE LIMIT ADJ parameter setting. When OFF is selected, the SDP-40 does not restrict the output level of these signals, regardless of the LFE LIMIT ADJ parameter setting.

LFE LIMIT ADJ 75 to 120dB

SETUP SPEAKERS MANUAL LEVELS CALIBRATION BASS PEAK LIMITERS

LFE LIMIT ADJ

Specifies the output level restriction the SDP-40 applies to the LFE output connector as well as to other Main Zone audio output connectors to which low-frequency signals are redirected. When the LFE LIMIT ADJ parameter is selected, it is automatically set to 75dB. The SDP-40 applies the selected output level restriction when the LFE LIMITER parameter is set to ON.

3-40