JBL SDP-40 manual Setting Bass Peak Limiters, Setup, Parameter, Default, Possible, Settings

SETUP

JBL

SETTING BASS PEAK LIMITERS

SETUP SPEAKERS MANUAL LEVELS CALIBRATION BASS PEAK LIMITERS

Selecting the LEVELS CALIBRATION menu BASS PEAK LIMITERS option opens the BASS PEAK LIMITERS menu shown below, which can be used to set amplitude limits for low-frequency signals sent to the Main Zone audio output connectors labeled Subwoofer L/R and LFE as well as low-frequency signals redirected to other Main Zone audio output connectors. The SDP-40 is equipped with an internal limiter that prevents low-frequency signals from exceeding a designated output level, which is essential for Dolby Digital and dts(-ES) sources that produce low- frequency signals peaks at much higher output levels than 2-channel sources. In home theaters, the subwoofers and their associated amplifiers might not be able to reproduce these signals without overloading.

MAIN MENU

MODE ADJUST AUDIO CONTROLS SETUP

SETUP

INPUTS

SPEAKERS

REAR PANEL CONFIG DISPLAYS VOLUME CONTROLS TRIGGERS

LOCK OPTIONS

SPEAKER SETUP

CUSTOM SETUP SYNTHESIS 7CH SETUP SPEAKER DISTANCES LEVELS CALIBRATION

	R	SR	RR
	+0.0dB	+0.0dB	+0.0dB
	C
	+0.0dB
M	L	SL	RL
SUB
+0.0dB	+0.0dB	+0.0dB	+0.0dB

LEVELS CALIBRATION

INTERNAL NOISE TEST DACS CALIBRATION BASS PEAK LIMITERS

BASS PEAK LIMITERS

CAL NOISE	ON
L/R LIMITER	ON
L/R LIMIT ADJ	100dB
LFE LIMITER	ON
LFE LIMIT ADJ	100dB

!CAUTION!

HIGH AUDIO LEVELS

75 to 120dB

ON

OFF

Parameter	Default	Possible
	Setting	Settings
CAL NOISE	ON	ON, OFF
L/R LIMITER	ON	ON, OFF
L/R LIMIT ADJ	100dB	75 to 120dB
LFE LIMITER	ON	ON, OFF
LFE LIMIT ADJ	100dB	75 to 120dB

3-39