JBL SDP-40 manual Troubleshooting & Maintenance

SDP-40

Troubleshooting & Maintenance

Note:

The Mute button must be pressed within 2 seconds of deactivating standby mode. Otherwise, the "MUTE ON" message will appear on the on-screen and front panel displays. If this occurs, too much time has passed. Begin again with step 2.

5. Press the	and	arrow buttons to highlight the desired
option.

•Highlight the RESTORE DEFAULTS option to restore factory- default settings.

•Highlight the EXIT option to close the FACTORY SETTINGS menu without restoring factory-default settings.

6. When the desired option is highlighted, press the	arrow
button to select this option.

•If the RESTORE DEFAULTS option was selected, the FACTORY SETTINGS message shown on the previous page will appear on the on-screen and front panel displays. When this message appears, press a front panel or remote control button to restart the SDP-40.

•If the EXIT option is selected, the FACTORY SETTINGS menu will close and the two-line status will open on the on-screen and front panel displays.

6-5