JBL SDP-40 manual Setup, Digital, ANLG Analog, DMIX Downmix, Note the following

SETUP

JBL

Configuring Advanced Input Settings (continued from page 3-17)

ZONE2 & RECORD IN Parameter Settings

DIGITAL			ANLG (Analog)	DMIX (Downmix)
The SDP-40 sends the assigned digital	The SDP-40 sends the assigned ana-			The SDP-40 sends a downmixed version of Main Zone audio to the Zone 2
audio input connector to the Zone 2 or	log audio input connector to the Zone			or Record Zone audio output connectors. Independent zone monitoring is
Record Zone audio output connectors.	2 or Record Zone audio output con-			not available. Downmixing is available when all of the following conditions
The SDP-40 ignores the assigned analog	nectors. The SDP-40 ignores the			are met:
audio input connector. Independent	assigned digital audio input connec-			• The same input must be selected in the Main Zone and Zone 2 or in
zone monitoring is available.	tor. Independent zone monitoring is
				the Main Zone and the Record Zone. Otherwise, the Zone 2 or Record
	available.
				Zone audio output connectors will mute.
Note the following:				• A Dolby Digital or dts(-ES) source must be present.
	Note the following:
• The SDP-40 passes digital sources
				• The 5.1a BYPASS listening mode must not be activated.
to all Zone 2 or Record Zone	•	The	SDP-40 passes analog
audio output connectors.		sources to all Zone 2 or Record
• The SDP-40 passes digital input		Zone audio output connectors.		Note the following:
signals directly to the Record Zone	• The SDP-40 passes analog input			• In the 5.1 analog mode, output signals from the Main Zone audio
digital audio output connectors.		signals directly to the Zone 2 or
				output connectors labeled Front L/R are sent to Zone 2. Signals from
The SDP-40 sends digital input		Record Zone analog audio output
				other Main Zone audio output connectors are ignored.
signals through D/A conversion		connectors. The SDP-40 sends
before passing them to the Zone 2		analog input signals through A/D		• Main Zone listening mode activation affects the Zone 2 and Record
or Record Zone analog audio		conversion before passing them		Zone audio output connectors. For instance, when the MONO listening
output connectors.		to the Record Zone digital audio		mode is activated, the Zone 2 and Record Zone audio output connectors
• The SDP-40 automatically sets		output connectors.		will generate mono output signals.
the ZONE2 or RECORD IN	•	The	SDP-40 automatically sets	• It is recommended to set the ZONE2 and RECORD IN parameters to
parameter to DIGITAL when no		the ZONE2 or RECORD IN		DMIX when recording from a DVD player without built-in Dolby Digital
analog audio input connector is		parameter to ANLG when no dig-		or dts-ES decoding to a VCR or PVR (i.e. Tivo® or Replay TV®).
assigned.		ital	audio input connector is	• The SDP-40 automatically uses LOGIC7 encoding to downmix multi-
		assigned.
• The INPUT SETUP menu DIGITAL				channel sources (except 5.1-channel analog sources) to LOGIC7-
IN parameter can be used to assign	• The INPUT SETUP menu ANALOG			encoded stereo output signals for listening and recording. LOGIC7-
a digital audio input connector		IN parameter can be used to assign		encoded downmixes are compatible with matrix decoders, but will
for the selected input.		an analog audio input connector		sound best when played back through a LOGIC7 listening mode.
		for the selected input.

3-18