JBL SDP-40 manual 5.1a 2-CHANNEL, Mode Adjust, Default, Possible, Parameter, Settings

SDP-40

MODE ADJUST

5.1a 2-CHANNEL

MODE ADJUST 5.1a 2-CHANNEL

•Designed for converting 5.1-channel analog input signals into 2-channel LOGIC7-encoded output signals.

•Sends downmixed 5.1-channel analog input signals to the front speakers and the subwoofer.

•Recommended for recording purposes, particularly for recording from a DVD-A or multi-channel SACD player to a CD-R or another 2-channel recording format.

	Default	Possible
Parameter	Setting	Settings
CENTER MIX	+0dB	-25 to +5dB
SURROUND MIX	+0dB	-5 to +5dB
CNTR DLY SAMPLES	+0	-127 to +127
MASTER LEVEL	+0dB	-5 to +5dB
LFE MIX	+0.0dB	-20.0 to +0.0dB
SUB L/R LVL	+0dB	OFF, -30 to +12dB
CUSTOM	Refer to page 5-33

Listening mode menu parameter descriptions begin on page 5-34.

5.1a BYPASS

MODE ADJUST 5.1a BYPASS

•Designed for playback of 5.1-channel analog sources, such as DVD-A or SACD players.

•Sends the 5.1-channel analog audio input connector directly to the Main Zone volume control and audio output connectors as shown on pages 2-7 and 3-58. These signals receive no internal processing.

•When both side and rear speakers are present, surround channel signals are sent in parallel to the side and rear speakers. To configure a 5-channel speaker setup, set the OUTPUT LEVELS menu SIDE L/R or REAR L/R parameter to OFF to deactivate the associated surround speakers.

•The 5.1a BYPASS listening mode is automatically activated whenever the 5.1-channel analog audio input connector is assigned to the selected input. The 5.1a BYPASS listening mode is only available for 5.1-channel analog sources.

Parameter

OUTPUT LEVELS	Refer to page 5-32
CUSTOM	Refer to page 5-33

Listening mode menu parameter descriptions begin on page 5-34.

Note:

Speaker crossover settings, speaker distances, and audio controls (tone controls) are not available when the 5.1a BYPASS listening mode is activated.

5-31