Juniper Networks SRX 210 manual Configure an administrator account on the device

Chapter 16: Performing Initial Software Configuration on the SRX210 Services Gateway

6.Configure an administrator account on the device.

[edit]

root@# set system login user admin class super-user authentication plain-text-password

7.Commit the configuration to activate it on the device.

[edit]

root@# commit

8.Log in as the administrative user you configured in Step 6.

9.Configure the name of the device. If the name includes spaces, enclose the name in quotation marks (“ ”).

configure [edit]

admin@# set system host-name host-name

10.Configure the traffic interface.

[edit]

admin@# set interfaces ge-0/0/1 unit 0 family inet address address/prefix-length

11.Configure the default route.

[edit]

admin@# set routing-options static route 0.0.0.0/0 next-hop gateway

12.Configure basic security zones and bind them to traffic interfaces.

[edit]

admin@# set security zones security-zone untrust interfaces ge-0/0/1

13.Configure basic security policies.

[edit]

admin@# set security policies from-zone trust to-zone untrust policy policy-namematch source-address any destination-address any application any

root@# set security policies from-zone trust to-zone untrust policy policy-namethen permit

14.Create a NAT rule for source translation of all Internet bound traffic.

[edit]

admin@# set security nat source rule-set interface-nat from zone trust admin@# set security nat source rule-set interface-nat to zone untrust admin@# set security nat source rule-set interface-nat rule rule1 match

source-address 0.0.0.0/0 destination-address 0.0.0.0/0

admin@# set security nat source rule-set interface-nat rule rule1 then source-nat interface

Performing Initial Software Configuration on the SRX210 Services Gateway Using the CLI ■ 105