Juniper Networks SRX 210 manual Component LEDs on the Services Gateway continued

Chapter 18: Monitoring the SRX210 Services Gateway

Table 43: Component LEDs on the Services Gateway (continued)

LED	State	Meaning
Power LED	Green	The device is receiving
		power and is functioning
		normally.
	Amber	The Power button has been
		pressed and quickly
		released.
	Off	The device is not receiving
		power.

HA LED	Off
Mini-PIM LED	Green	The Mini-PIM is present and
		detected by the device.
	Off	The Mini-PIM is not present
		or is not detected by the
		device.

Possible Causes and Corrective Actions

Normal condition. No action is required.

Normal condition. No action is required.

Normal condition if the services gateway is switched off. No action is required.

If you have not powered off the services gateway, verify that the AC power cord from the power source to the device is not damaged, the socket is in working condition, and the device has an AC input voltage between 110 and 240 VAC.

See “Monitoring the SRX210 Services Gateway Power System” on page 125.

The device is not part of the chassis cluster setup.

Normal condition. No action is required.

See “Monitoring the SRX210 Services Gateway Using Chassis Alarm Conditions” on page 122.

Monitoring the SRX210 Services Gateway Components Using LEDs ■ 121