Juniper Networks SRX 210 RJ-45 Connector Pinouts for the SRX210 Services Gateway Ethernet Port

SRX210 Services Gateway Hardware Guide

Related Topics ■ RJ-45 Connector Pinouts for the SRX210 Services Gateway Ethernet Port on page 162

■RJ-45 Connector Pinouts for the SRX210 Services Gateway Console Port on page 163

■SRX210 Services Gateway Front Panel and Back Panel Views (Low Memory, High Memory and PoE Version) on page 10

RJ-45 Connector Pinouts for the SRX210 Services Gateway Ethernet Port

Figure 30 on page 162 shows the RJ-45 cable connector pinouts for Ethernet ports.

Figure 30: Ethernet Cable Connector (RJ-45)

Table 50 on page 162 describes the RJ-45 connector pinouts for the Ethernet port for 10/100 Mbps.

Table 50: RJ-45 Connector Pinouts for the Services Gateway Ethernet Port (10/100 Mbps)

Pin	Signal
1	TX+
2	TX-
3	RX+
4	Termination network
5	Termination network
6	RX-
7	Termination network
8	Termination network

Table 51 on page 163 describes the RJ-45 connector pinouts for the Ethernet port for 1Gbps (1000 Mbps).

162■ RJ-45 Connector Pinouts for the SRX210 Services Gateway Ethernet Port