Juniper Networks SRX 210 manual admin@host# set chassis config-button no-clear

Chapter 18: Monitoring the SRX210 Services Gateway

Related Topics ■ Changing the Reset Config Button Behavior on the SRX210 Services Gateway on page 127

■Monitoring the SRX210 Services Gateway Chassis Using the CLI on page 117

■Monitoring the SRX210 Services Gateway Components Using LEDs on page 120

■Monitoring the SRX210 Services Gateway Using Chassis Alarm Conditions on page 122

■Monitoring the SRX210 Services Gateway Power System on page 125

■Juniper Networks Technical Assistance Center on page 128

Changing the Reset Config Button Behavior on the SRX210 Services Gateway

You can change the default operation of the Reset Config button by limiting how the button resets the services gateway:

■To prevent the Reset Config button from setting the device to the factory default configuration and deleting all other configurations:

admin@host# set chassis config-button no-clear

You can still press and quickly release the button to reset it to the rescue configuration.

■To prevent the Reset Config button from setting the device to the rescue configuration:

admin@host# set chassis config-button no-rescue

You can still press and hold the button for 15 seconds or more to reset the gateway to the factory defaults.

■To disable the button and prevent the device from resetting to either configuration:

admin@host# set chassis config-button no-clear no-rescue

The no-rescueoption prevents the Reset Config button from loading the rescue configuration. The no-clearoption prevents the Reset Config button from deleting all configurations on the services gateway.

To return the function of the Reset Config button to its default behavior, remove the config-buttonstatement from the device configuration.

Related Topics ■ Using the Reset Config Button on the SRX210 Services Gateway on page 126

■Monitoring the SRX210 Services Gateway Chassis Using the CLI on page 117

■Monitoring the SRX210 Services Gateway Components Using LEDs on page 120

■Monitoring the SRX210 Services Gateway Using Chassis Alarm Conditions on page 122

Changing the Reset Config Button Behavior on the SRX210 Services Gateway ■ 127