Juniper Networks SRX 210 manual Installation Overview for the SRX210 Services Gateway, Chapter

Chapter 8

Installation Overview for the SRX210 Services Gateway

This chapter includes the following topic:

■Installation Overview for the SRX210 Services Gateway on page 57

Installation Overview for the SRX210 Services Gateway

After you have prepared your installation site, you are ready to unpack and install the services gateway. It is important to proceed through the installation process as shown in Table 24 on page 57.

Table 24: Installation Process Order for the SRX210 Services Gateway

StepTask

1Review the safety guidelines explained.

2Verify that you have prepared your site for the installation of the services gateway using the checklist.

3Unpack the services gateway and verify that the parts are received.

4Prepare the services gateway for installation.

For more information, see

“SRX210 Services Gateway General Safety Guidelines and Warnings” on page 133

“Site Preparation Checklist for the SRX210 Services Gateway” on page 49

“Unpacking the SRX210 Services Gateway” on page 61

“Preparing the SRX210 Services Gateway for Rack-Mount,Desk-Mount, and Wall-Mount Installation” on page 65

5	Install the services gateway.	■ Installing the SRX210 Services
		Gateway in a Rack on page 71
		■ Installing the SRX210 Services
		Gateway on a Desk on page 75
		■ Installing the SRX210 Services
		Gateway on a Wall on page 76
6	Connect cables to external devices.	“Connecting and Organizing Interface
		Cables to the SRX210 Services
		Gateway” on page 83

Installation Overview for the SRX210 Services Gateway ■ 57