Juniper Networks SRX 210 manual Configuring PoE Functionality on the SRX210 Services Gateway

Chapter 4: SRX210 Services Gateway Power over Ethernet Support

Table 18: PoE Classes and Power Ratings on the SRX210 Services Gateway

Class	Maximum Power Level Output from the PoE Port
0	15.4 watts
1	4.0 watts
2	7.0 watts
3	15.4 watts
4	30.0 watts

Related Topics ■ SRX210 Services Gateway Description on page 3

■SRX210 Services Gateway Specifications on page 7

■SRX210 Services Gateway Front Panel and Back Panel Views (Low Memory, High Memory and PoE Version) on page 10

■SRX210 Services Gateway Built-In Interfaces on page 14

■SRX210 Services Gateway LEDs on page 18

■Mini-Physical Interface Modules on the SRX210 Services Gateway

■SRX210 Services Gateway 3G ExpressCard Overview on page 29

Configuring PoE Functionality on the SRX210 Services Gateway

To enable the Power over Ethernet (PoE) feature support on your SRX210 Services Gateway, you must configure the services gateway.

You can configure PoE using the CLI configuration editor.

For more details on configuring PoE, see the JUNOS Software Interfaces and Routing Configuration Guide.

Related Topics ■ SRX210 Services Gateway Description on page 3

■SRX210 Services Gateway Specifications on page 7

■SRX210 Services Gateway Front Panel and Back Panel Views (Low Memory, High Memory and PoE Version) on page 10

■SRX210 Services Gateway Built-In Interfaces on page 14

■SRX210 Services Gateway LEDs on page 18

■Mini-Physical Interface Modules on the SRX210 Services Gateway

Configuring PoE Functionality on the SRX210 Services Gateway ■ 37