Juniper Networks SRX 210 manual Gateway in a Rack

SRX210 Services Gateway Hardware Guide

Figure 20: SRX210 Services Gateway Rack Installation — Hanging the Services

Gateway in a Rack

6.Have a second person install a mounting screw into each of the two aligned holes. Use a number-3 Phillips screwdriver to tighten the screws.

7.Install the second screw in each mounting bracket.

8.Verify that the mounting screws on one side of the rack are aligned with the mounting screws on the opposite side and that the device is level.

Related Topics ■ SRX210 Services Gateway General Safety Guidelines and Warnings on page 133

■Required Tools and Parts for Installing and Maintaining the SRX210 Services Gateway on page 59

■Preparing the SRX210 Services Gateway for Rack-Mount Installation on page 66

■Adjusting the Power Supply Adapter Tray for the SRX210 Services Gateway for Rack-Mount Installation on page 70

■Installing the SRX210 Services Gateway on a Desk on page 75

■Installing the SRX210 Services Gateway on a Wall on page 76

74■ Installing the SRX210 Services Gateway in a Rack