Juniper Networks SRX 210 manual Preparing the SRX210 Services Gateway for Wall-Mount Installation

SRX210 Services Gateway Hardware Guide

Related Topics ■ Site Preparation Checklist for the SRX210 Services Gateway on page 49

■Clearance Requirements for Airflow and Hardware Maintenance of the SRX210 Services Gateway on page 54

■Unpacking the SRX210 Services Gateway on page 61

■Preparing the SRX210 Services Gateway for Rack-Mount Installation on page 66

■Preparing the SRX210 Services Gateway for Wall-Mount Installation on page 68

Preparing the SRX210 Services Gateway for Wall-Mount Installation

You can mount an SRX210 Services Gateway on a wall. The four rubber feet attached to the chassis provide stability.

Table 30 on page 68 provides the list of tasks you need to perform before installing the device.

Table 30: SRX210 Services Gateway Preinstallation Checklist for Wall-Mount

Installation

Task	Additional Information
Verify that the site meets the requirements.	“Site Preparation Checklist for the
	SRX210 Services Gateway” on page 49
Remove the services gateway chassis from the	“Unpacking the SRX210 Services
shipping carton.	Gateway” on page 61

Verify that you have the following parts available in your wall-mounting kit to mount the SRX210 Services Gateway on wall:

■Wall-mounting brackets

■Screws

NOTE: The wall-mounting kit is not shipped with the device and must be ordered separately.

Related Topics ■ Site Preparation Checklist for the SRX210 Services Gateway on page 49

■Unpacking the SRX210 Services Gateway on page 61

■Preparing the SRX210 Services Gateway for Rack-Mount Installation on page 66

■Preparing the SRX210 Services Gateway for Desk-Mount Installation on page 67

68■ Preparing the SRX210 Services Gateway for Wall-Mount Installation